Guide To Saab 9-3 Key Replacement In 2023 Guide To Saab 9-3 Key Replacement In 2023
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of steps that are unique to add an additional ignition key. It requires dealer service using a handheld computer dubbed Tech-2. Then the transponder is replaced and a key need to be purchased.
It is a good idea to rotate your keys in order that one doesn't get worn out more quickly than the other. This will also keep your keys in good condition.
Replacement Case
In contrast to the traditional Saab keys of the past keys, the modern key fobs have electronics inside which makes it difficult to create a duplicate. This has made car theft much more difficult than it was twenty years ago. But, it has also made the replacement of lost keys a more expensive task.
Every owner of a Saab 9-3 needs to have at minimum two working keys. It's expensive to replace a lost key as it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers usually charge between $100 and $200 to do this.
There are a few ways to avoid these expensive. Some parts dealers can look up the code on a spare key (usually the same one that opens the doors and turns off the ignition) and cut a new key blade out of metal for less than the dealer's cost. The key must be the exact same as the original to allow it to work in your vehicle.
You can also change the case yourself by following these steps. You'll need a flathead screwdriver and some patience. Utilizing the screwdriver, slowly tear the plastic away and then separate the emergency key from the case. When saab fob key replacement is opened take out all electronic components and place them in your new case. Be sure to put the correct badge and key back into the case, as well.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive part that can be quickly and easily replaced. This DIY video from YouTube Cyclone Cyd shows how to replace the battery in the remote key fob in only four steps. This tutorial should work for any modern saab-type key fob, although the process might differ slightly.
The first step is to find the button that opens the backup key in the fob. This button is usually on the back of your fob, next to the Saab Logo. Then, use a flathead screwdriver to insert into the small hole inside this button. This will allow you to open the fob's case to allow you to replace the battery.
After the new battery CR1632 is installed You can then reassemble the remote key fob. You can then program it to your car. The entire process shouldn't exceed an hour. It is a simple procedure that doesn't require any special tools.
The process is more complicated in the event that you lose the key, but it's possible. The dealer must find the VIN number of the car and then order a new key blade and TWICE module that has the proper unique code. Then, they'll have to cut the replacement key and then program it with an innovative software tool called MDI.
Replacement Key Fob
The key fob is the piece that locks and unlocks your car, it's got a battery inside. The batteries are able to last for, and they will eventually die. This is a regular issue that happens to all cars and the good thing is that you can change the batteries in a majority of fobs, without replacing the entire case. Amazon sells replacement fobs that already have all the electronics installed. It is easy to remove the case and replace the batteries. You'll need to take out the emergency key before you replace the batteries. To do this, place a small flathead screwsdriver into the slot that is in the middle of the. The case will split once you move the screwdriver around it.
If you're looking to replace your keys, have a spare available. This will save you a lot of money. If you have spare keys, you can ask the dealer cut a new key and program it into your car, which is cheaper than replacing the entire key fob.
If you don't have a spare you can add an additional key to your car, but it requires a lot of research and effort. It costs around a hundred dollars to purchase an additional car key. The computer of the vehicle must also be programmed. This can be done by a professional, but it's a costly choice for the majority of owners.
Replacement Ignition
Unlike earlier Saab cars, the modern SAAB 9-3 models use a much more sophisticated alarm system that is built on a key code. If you lose your sole key, it may be costly to purchase a new one since the car must be equipped with a specific computer and also be programmed to accept a brand new key. Most locksmiths can't do this or even dealers can charge several hundreds of dollars just to program the new key!
If you've lost your only working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to make an exchange, and they will charge top dollar for it. We can reprogram the EEPROM on your car's computer to be ready to accept an additional key. This will save you more than 50% on the cost you would pay at the dealer.
If you've been a faithful owner of a 03-11 SAAB 9-3, then you likely realize that the ignition key isn't very durable. If the ignition key you have isn't functioning properly, it is time to consider replacing it. They can become very sticky and the buttons have been known to fall off. Fortunately, replacing the ignition key isn't as complicated as it seems, and it can be done fairly quickly using the proper tools.